Color LCD, transflective TFT 10.4”, daylight visible (G10C model).Geonav 7 Software Update Still in great condition. Sizes Large for wetsuit and two Extra Large harness. The use of the GEONAV implies knowledge and accep- tance of this warning by the user. NOTE: Technical characteristics and functions described in this manual are subject to change as a result of improvements or changes to the product. Introduction INTRODUCTION The GEONAV is a chart plotter that can be interfaced with a GPS receiver, fishfinder unit, autopilot and other onboard in- struments, and allows displaying the boat’s geographical po- sition with respect to an electronic chart. Fix the bracket to the boat’s dashboard with 4 screws 5mm in diameter.Up to 5000 trackpoints (multiple tracks).Storage temperature: -20☌ to +70☌ Memory characteristics.Protection against: Reverse polarity Input overvoltage.Storage of track data including significant additional in- formation such as date, time, latitude/longitude, depth, temperature, etc.Easy Pilot function for easy and direct control of autopilot.Characteristics CHARACTERISTICS General characteristics.Thanks to the GEONAV and a NAVIONICS Platinum™.

That is, WARP devices created by passing D3D_DRIVER_TYPE_WARP in the DriverType parameter of D3D11CreateDevice don’t support 11.1 nor do they support shared surfaces.Flush mounting Locate the area where the GEONAV is to be installed, then use the cutting template supplied with the plotter to cut the panel. WARP devices only support feature level 11.0.However, the runtime still allows them to be called, and performs validation that they are being used correctly on non-shared resources. IDXGIDevice2:: OfferResources and IDXGIDevice2:: ReclaimResources are not supported on the Platform Update for Windows 7.Stereo is not supported on the Platform Update for Windows 7 so this method is equivalent to IDXGIOutput:: FindClosestMatchingMode as DXGI_MODE_DESC1.Stereo will always be FALSE. IDXGIOutput1:: GetDisplayModeList1 and IDXGIOutput1:: FindClosestMatchingMode1 were added to facilitate stereo display modes.IDXGIDispla圜ontrol:: IsStereoEnabled, IDXGIFactory2:: IsWindowedStereoEnabled, and IDXGISwapChain1:: IsTemporaryMonoSupported all return FALSE.Its value is still stored and can be retrieved, but it has no effect.

IDXGISwapChain1:: SetBackgroundColor is only useful when set on a swapchain using DXGI_SCALING_NONE.

DXGI_SCALING_NONE is not supported on Windows 7 with the platform update and causes CreateSwapChainForHwnd to return DXGI_ERROR_INVALID_CALL when called.

IDXGIFactory2:: CreateSwapChainForHwnd takes a DXGI_SWAP_CHAIN_DESC1 structure, which has a field for Scaling.

These APIs have behavior differences, as noted:

Geonav 7 software update